WP-1X Built-in pickup for woodwind instruments
A big advantage is that in the built-in position in the mouthpiece, frequencies can no longer be erased even with the highest tones. This results in a very balanced sound in all ranges. Absolute uniformity over all tones of the woodwind instrument and a sound pickup without feedback are the best prerequisites for stress-free monitoring.
For maximum freedom of movement, the system can be operated with almost all guitar wireless systems. These advantages guarantee the best conditions for uncompromisingly good stage performance.
How does your instrument sound with the WP-1X pickup?
For whom is the WP-1X the right pickup?
For some musicians, the body of the instrument must not be drilled under any circumstances and an extremely inconspicuous design is important to them. For this purpose, a drilling of the mouthpiece is absolutely acceptable. These clarinet or saxophone players are just right for the Rumberger WP-1X, because the miniature pickup is almost invisible. In contrast to the K1X, which is a change-over system, the WP-1X remains permanently mounted in the mouthpiece.
WP-1X-Features
natural sound
highest quality workmanship
uniform sound pickup in all positions
no detuning of the instrument by installation
absolute freedom from feedback
ideal for wireless operation
complete freedom of movement on stage
lowest structure-borne sound absorption
no frequency cancellations possible
absolutely unobtrusive design
no drilling of the instrument body required
Technical data
Technical data pickup WP-1X
Mode of operation: | Piezo Technology |
directional pattern: | Sphere |
Frequency range: | 30 – 20000 Hz |
Output impedance PA-WP-1: | 600 Ohm |
Power supply: | 48 V Phantompower |
Weight pickup: | 2 g |
Transport weight in case: | 190 g |
Sounddemos
Sounddemos with different clarinets
clarinet
Carinet with pickup WP-1X - FX
Bass clarinet with pickup WP-1X
Bass clarinet with pickup WP-1X - FX
Sound demos with different saxophones
Carinet with pickup WP-1X
Soprano Saxophone with pickup WP-1X - FX
Tenor saxophone with pickup WP-1X
Tenor saxophone with pickup WP-1X - FX
Baritone saxophone with pickup WP-1X
Baritone saxophone with pickup WP-1X - FX
Bass-Saxophone with pickup WP-1X
Bass-Saxophone with pickup WP-1X - FX
Tubax with pickup WP-1X
Tubax with pickup WP-1X - FX
Prices WP-1X
Type |
Scope of delviery |
Price |
---|---|---|
WP-1X![]() |
WP-1 Built-in pickup, transport case, phantom powered connection cable, operating and installation instructions | 339,– € |
recommended retail price incl. VAT
Optional accessories
AFK-X | Cable for wireless operation, open end, (1.05m) | 35,- € |
AFK-X AKG | Cable for wireless operation with connector for AKG wireless systems (3Pol | 1,05 m) | 49,- € |
AFK-X Shure | Cable for wireless operation with connector for Shure wireless systems(4Pol | 1,05 m) | 49,- € |
AFK-X Sennheiser | Cable for wireless operation with connector for sennheiser wireless systems (1.05m) | 49,- € |
PA-X | Phantom-powered cable, XLR-connector, contains the electronics for impedance matching, (in the complete system already included) | 119,- € |
PK-X | Passive cable, 6.3 mm mono jack plug connection for special applications, e. g. effect devices with high-impedance connection | 49,- € |
recommended retail price incl. VAT
Downloads
Possible Applications
Where can you buy the WP-1X pickup?
Directly from the manufacturer
Are you a specialist dealer?
Then we are looking forward to your inquiry.